Defense & Aerospace
Försvar och flyg Värmelösningar
Hög tillförlitlighet och markutrustning för tuffa miljöer
Industry Characteristics & Heating Challenges
Vehicle, airborne and field-support equipment imposes extra requirements on vibration, shock, wide temperature range and EMC. Heating assemblies use ruggedized structures and redundant protection, with terminal housings designed to the environmental protection level. Each unit is tested for insulation, dielectric strength, vibration and thermal cycling before shipment, with full process records retained.
Typiska tillämpningar
- Vehicle shelters and shelter air conditioning
- Radar and electronics temperature control
- Aviation ground-support vehicles
- Field fuel preheating
- Special power-supply cooling and preheat
Questions We Ask During Selection
- Q1Exact composition and concentration of the medium, and whether it is corrosive, scaling or prone to polymerization.
- Q2Whether heating is intermittent or continuous, and the required heat-up time.
- Q3What explosion-proof zone the site falls into, and how gas group and temperature class are classified.
- Q4Material, pressure rating and available installation opening size of the vessel or pipe.
- Q5Whether the power supply can handle the high-power load, and whether soft start or power regulation is needed.
- Q6Maintenance cycle and cleaning method, which determine whether the structure is withdrawable or fixed.
Within the same industry, heating requirements can vary greatly between processes. Sending us your specific operating conditions saves more time than selecting against a catalog.
+86 515 8888 6688Relaterade produkter
Visa alla →Flänsad doppvärmare
HYF Series
Knippebaserad doppvärmare med standardfläns som montagegränssnitt; lämplig för tryckkärl och hög processeffekt, och hela paketet kan lyftas ur vid service.
- Power
- 3 – 500 kW
- Temp
- Ambient – 600°C
Skruvplugg-doppvärmare
HYS Series
Kompakt värmare som skruvas i tankväggen; den lilla gängan passar tankar med låg till medelhög effekt och värmekabel i rörledningar.
- Power
- 0.5 – 36 kW
- Temp
- Ambient – 400°C
Genomströmningsvärmare
HYC Series
Uppvärmning direkt i ledningen: mediet strömmar kontinuerligt genom huset och värms upp, med temperaturreglering, överhettningsskydd och flödesinterlock integrerade för direkt anslutning till rör.
- Power
- 6 – 300 kW
- Temp
- Ambient – 350°C
Begär offert
Fyll i dina driftparametrar så svarar en ingenjör med urval och offert inom en arbetsdag.